8 Tips for Basement Finishing

Are you searching for the right ways to finish your basement? Do you want to finish your basement in the perfect way for efficiency? Read the tips below to learn the things to consider when finishing your basement.

  1. Check Plumbing

You should examine the plumbing of the house, especially if you intend to add a bathroom in the basement. If the main drain runs underground, there will not be any issues, but if it runs above ground, you would need a pump and a grinder before the toilet can function effectively without backing up.

  1. Seal and Insulate the Rim Joists

Another step you must take before finishing your basement is to insulate the run joists; else, it would be a source of energy loss later. Seal the rim joists with caulks and expanding spray foam. This is a crucial process to avoid problems later.

  1. Waterproof the Walls

Before you finish your basement, it is vital that you waterproof the walls to prevent water sealing in. Use waterproofing paint on already prepared walls. Fill every pinhole and apply several coatings for perfect interior waterproofing.

  1. Basement Waterproofing

It is essential that you waterproof the basement in and out to prevent water leakage, condensation, and a potential mold problem. Hire professionals and ensure that the basement waterproofing is appropriately carried out to avoid future problems.

  1. Enhance Airflow

Ensure that there is optimal airflow in the basement before finishing up. Boost the airflow in the long duct with an in-line duck fan. Check that electrical connections are working correctly. You can make the fan run 24/7 or be installed with a thermostat.

  1. Design the Perfect HVAC System

Hire a professional to design the HVAC of your basement. Do not be tempted to do it yourself. Have the ductwork and the entire system handled by a professional to guarantee efficiency.

  1. Very Lighting Choices

Take advantage of different types of lighting to illuminate the basement. Use appliances that brightly lit up the basement, and also install a dimmer switch for full control of the level of brightness.

  1. Backup Sump Pumps

As part of your basement waterproofing process, have a battery backup for the main sump pump to cater to a power outage. This will be necessary to prevent pump failure and flooding during a heavy downpour.